Centrifuges, Separators & Compactors

UNIVERSAL PHOTONICS® presents all of Turbo-HKS Centrifuges, Separators and Compactors, as part of our exten­sive line of advanced equipment designed to deliver the latest in chilling, filtering and processing technologies.

Our systems focus on revolution­izing laboratory efficiencies and yielding profitable benefits including reduced operating costs, increased lens quality, and delivering environ­mental compliance.

Centralized Systems

UNI-P220

Coolant Cleaning & Supply for: several lens-generating machines (LOH,Schneider, OptoTech, etc.)
The UN1-P220 provides a centralized, fully auto­matic cleaning and treat­ment system for several machine tools via a cen­tral line. Automatic dis­charge of the separated solids from the centrifug eallows for treatment of larger quantities of solid material without expensive man­ual assistance. The UN1-P220 SYSTEM can be located in a separate area, freeing up space around the production machine. Optional equipment is available.

Centrifuges

Uni-KM 50

Coolant cleaning and supply for: One lens-generating machine (LOH, Schneider, OptoTech, etc.) and for 3-5 edge treatment machines.

Integrated centrifuge system with com­pact footprint that reliably separates even particles perceivable only by microscope and circulates clean liquid back into the tank.

  • Total Volumetric Capacity: Approx. 60 Gallons
  • Max Flow Rate: 15 GPM
  • Coolants: Water, Emulson, Oil
  • Sludge: Organic (Powder) & Mineral Glass

Uni-MR 120

Coolant cleaning and supply for: 1 or 2 lens-generating machine(s) (LOH, Schneider, OptoTech, etc.) and for 10 - 12 edge treatment machines.

Mode of operation sim­ilar to UN1-KM 50 with higher performance ratings.

  • Total Volumetric Capacity: Approx. 150 Gallons
  • Max Flow Rate: 30 GPM
  • Coolants: Water, Emulson, Oil
  • Sludge: Organic (Powder) Á Mineral Glass

Compact Systems

Uni-KP 60 SINGLEZ

Coolant cleaning and supply for: One lens-generating machine (LOH, Schneider, OptoTech, etc.) and for 3-5 edge treatment machines.

Compact system with cutter and compactor for plastic chips and centrifuge for separation of very fine sol id particles. Coolant from the machine tool flows through the press where long chips are cut up and compressed. The coolant is then carried into the centrifuge where even the most min­ute-sized, solid particles are separated. The clean liquid flows into the system's storage tank and is supplied onto the machine tool. Our CHILLMATE cooling units and/or other equipment are avail­able for optional installation.

  • Max Flow Rate: 15 GPM
  • Coolants: Water, Emulson, Oil
  • Sludge: Chips & Smaller Amount of Powder from Organic Lenses.

Uni-KP 60 TWINZ

Coolant cleaning and supply for: 1 or 2 lens-generating machine(s) (LOH, Schneider, OptoTech, etc.) and for 10 - 12 edge treatment machines.

Similar in construction and operation to the S1NGLEZ, the Tw1NZ includes two centrifuges to treat larger quantities of fine solid particles. Its larger size allows longer periods between emp­tying the centrifuge insert, and the Tw1NZ will continue to operate on one centrifuge while the other is being discharged of solids.

  • Max Flow Rate: 15 GPM
  • Coolants: Water, Emulson, Oil
  • Sludge: Chips & Powder from Organic Lenses

Compactor

Uni-KP 60

Plastic Chip Cutting & Compacting for: The new generation of lens-generating machine (LOH, Vpro, Schneider, HSC 100, etc.)

The Uni-KP 60 Cutter & Compactor connects directly to the machine tool. Coolant flows directly into the chips press where long plastic chips are cut and compressed, dramatically reducing waste volume.

Residual liquid is collected and pumped back to the central col­lecting tank.

  • Max Flow Rate: 15 GPM
  • Coolants: Water, Emulson, Oil
  • Sludge: Chips from Organic Glass.