Pre-Cote #34 Green gl
LB0306

Description

Pre-Cote is a semi-transparent coating utilized to protect a variety of precision surfaces.  Pre-Cote prevents marring, and protects against dust and dirt contamination.  

Application

Clean the substrate to remove grease and oil.  Apply Pre-Cote by brushing or spraying the surface.  When brushing, apply using full brush strokes.  After application, wait for 10 minutes to a tack-free finish and 24 hours for thorough drying.  Pre-Cote can be removed by peeling, or a polar solvent such as isopropyl alcohol, or acetone.  To clean the nozzle on aerosol cans, soak in acetone or isopropyl alcohol immediately after use.  

Benefits

  • Long lasting protection
  • Easily removed to expose a clean surface
  • Removes light grease, oils, and fingerprints
  • Easily applied in thin uniform layers
  • Protects critical surfaces from ambient conditions

Physical Characteristics

  • Flash Point (°F): 48
  • Specific Gravity: 0.77 - 0.81
  • Chemical Base: Vinyl
  • Coverage Area: 220 sq. ft. per gallon for one-mil dry film

Availability

  • 1 Pint(s)
  • 1 Can

Documents

Document Type Langauage
Technical Data Sheet English (US)
Brochure English (US)